Moreview system

A large-scale sliding door system with slim profiles completely hidden in the floor, walls and ceiling.

Moreview makes it possible to construct doors with a maximum height of up to 4 m and a maximum sliding leaf weight of up to 1200 kg.

The aesthetics of the design are supported by, among other things, a visible mullion width of only 27 mm at the leaf exit. The innovative design allows glass panes to be installed side by side without any aluminium components visible from the outside. The static mullion makes it possible to create a sequence of fixed glazings, while the all-glass corner allows them to be joined at any angle.


New solution of the Moreview system allows for systemic connection of various window frames at an angle of 90° along with maintaining the level of glazing perfectly with the floor line.

Thanks to glazing resulting from the use of fixed windows, we can make the most of natural light and warmth. This will have a positive effect not only on our comfort of living, but will also reduce the costs of using the house.


The Moreview system has been enriched with a new solution which makes it possible to design fixed gazing. Single frame, which was used up till now, has been modernized by adding a detachable fin facilitating the installation of a glazed units. This procedure allows us to manufacture single-sash fixed windows and corners composed of two fixed elements.

The solution is compatible with standard frames without separated fins, which is especially important in structures broken multiple times at various angles.


Within the MV system, two solutions are available for automating the sash sliding process:

  • PREMIUM solution. The automatics is completely hidden in the Moreview frame, so the user does not see any structural element. The maximum weight of the moving sash is 1200 kg. The solution allows the control of leaves in virtually all configurations including corners and multi-leaf arrangements. The operator has a safety function including an overload system that stops the leaf on an obstacle and ensures that the leaf can be opened and closed in the event of a temporary power failure. The solution can be controlled by remote control, touch screen panel or android.

  • A surface-mounted solution in which the operator bar is attached to the MV top frame from the inside. Nevertheless, the solution is characterised by elegance and minimalism. The user sees only a small inspection bar for service access. The maximum weight of the moving leaf is 700 kg. The surface-mounted solution is available in two variants: automatic sliding of one leaf or two leaves that slide sideways. It is possible to install the automation on an already installed MV structure.





  • New sealing elements for even greater tightness requirements.
  • New aluminium base for single rail with an inclined edge to facilitate condensate removal.

Advantages of the system

  • unlimited access to sunlight – transparency up to 98%,
  • independent Moreview system structures can be connected at an angle of 90°,
  • a static mullion allows for the construction of a series of fixed glazing, which
    can additionally be joined at any angle thanks to the use of an all-glass corner,
  • manual or automatic control, the mechanism controlling the opening process,
    depending on the needs, can be hidden or mounted outside the structure,
  • possibility of glazing from the outside,
  • linear drainage integrated with the frame,
  • possibility of constructing doors with max. height up to 4 m and max. sliding
    leaf weight up to 1200 kg,
  • possibility of servicing the carriage set without having to remove the heavy




Technical parameters

ENERGY Thermal insulation EN 10077-2 Uw from 0,7 W/m²K
COMFORT Acoustic insulation EN ISO 140-3 Rw = 42 dB
Air permeability EN 12207 Class 4
Water tightness EN 12208 Class 8A
SAFETY Wind load resistance EN 12210 Class C4
Anti-theft protection EN 1627 RC2

System characteristic

Frame structural depth 90 mm, 192 mm, 294 mm
Leaf structural depth 72 mm
Infill thickness 31 ÷ 36 mm and 50 ÷ 60 mm
Maximum dimensions L x H leaf 4000 x 4000 mm
Maximum weight of manual leaf 400 kg
Maximum weight of automatic leaf 1200 kg
Maximum weight of fixed part 1200 kg
Structure type / leaves diagram Diagrams: A, C, D, F, G, K,
Galendage, 90° corners